WARNING!
Risk of electrical shock. Wait 10 minutes after disconnecting
the incoming power before removing the cover.
Mounting
The VARIOspeed
®
MICRO VFD is designed for wall mounting in a clean, cool, and dry location.
First, mount the supplied wall support bracket to the wall. Mark the hole locations and secure with
screws rated for the wall material. The use of the wall support bracket is required to allow air flow
through cooking fins. Do NOT mount outdoors or expose to water, high humidity, corrosive or explo-
sive gasses. Must be mounted vertically and requires a minimum of 100mm (4”) clearance on all
sides for adequate ventilation.
Mount the VARIOspeed
®
MICRO VFD on the support plate using supplied screws.
HOT!
Heat sink temperature may
rise to 90ºC (194ºF).
Do
NOT
touch heat sink.
SJE-Rhombus
®
VARIOspeed
®
Micro Controller User Manual
9
