STILL MODE OPTIONS - 2
Video
VideoLapse
Slow Rec
Still
PhotoLapse Burst Mode
Video+
photo
Car Mode
Underwater
Image Size
Exposure Time
Delay Capture
Quality
Sharpness
White Balance
Color
ISO
EV
Metering
RAW
Gyro Sensor
FOV
WDR
Distortion Correction
Time Stamp
Still
2
All graphics, words, and layout by Troy Ferrer 2016 [email protected]
AVERAGE
Meters the whole scene’s lighting.
METERING MODES
CENTER
Meters the middle part of the frame.
SPOT
Meters only a very small portion of the
center of the scene.
METERING › Prioritizes the brightness level of specific parts of the scene
depending on the Metering Mode that is used: Average, Center Weighted, or Spot.
RAW › When turned on, an uncompressed file separate from the JPG image will be written
on the card for the purpose of editing later. Use an external photo editing software to make
adjustments before saving to your intended filetype.
GYRO SENSOR › Enables active image-stabilization to eliminate camera shake.
FOV › Field Of View / Field Of Vision (also known as “Focal Length”) The higher the setting,
the wider the angle of the recorded scene becomes.
WDR › Automatically adjusts the range of brightness-to-darkness that the camera will record.
When turned on, it will help balance your pictures by adjusting the contrasts.
DISTORTION CORRECTION › Since the lens of your action camera has a very wide
FOV (Field of View), your camera will try to fit everything in, and will result in the center
appearing to be distorted or bulging. This feature will straighten the image.
TIME STAMP › When enabled, will display the date and time of your recording.
