S k y t r a q V e n u s 6 L o c a t i o n F i n d e r K e y C h a i n 6 5 c h a n n e l s
Page 3
C-2 To User Location Finder
(LF)
Note: Please confirm the GPS position is located.
2-1. Set up the first destination in “I” position.
：
Confirm the GPS position is located, go to setting interface for “I”, then pressing “confirm button” for two seconds to save
current position and start to indicate.
* Pressing “confirm button” again, it will resave new position.
2-2. Set up the second destination in “II” position.
Confirm GPS position located, then go to setting interface
for “II”, and then pressing “confirm button” for two seconds to
save current position and start to indicate. And so on.
* Pressing “confirm button” again, it will resave new
position.
7. To use G mouse
7-1 Plug the USB wire and connect with a laptop
The laptop must have mapping software installed. (We do not provide it) After connecting with laptop by USB wire, the
Location Finder Key Chain becomes your personal navigator.
8. To use Bluetooth GPS receiver
Activate the Bluetooth function in your PDA/Smart phone or PC
Before activating the Bluetooth function in your PDA/PC, please power on Bluetooth GPS Receiver for paring and check if
your device is equipped with Bluetooth function. When you have to key in the password to paring device and your display, the
number “0000” is particular defaults. If not, you may need to acquire an optional CF/SD Bluetooth card or Bluetooth dongle.
NOTE: The pairing procedure is required to execute in the first time only. And the pass code is “
0000
” if required.
8. Warranty
Our products are guaranteed to be free from defects in material and functions for a period of one year from the date of purchase.
Any failure of this product within this period, under normal conditions, will be repair at no charge to the customers.
2-3. Start to user LF function
After GPS position is located, it would start to indicate positions you
saved by switch “I ,II , III , IV or V”
2-4. When <15m to destination, LF would finish automatically.
After GPS position is located, the arrowhead would start to indicate
the direction. When destination under 15 meters, Location Finder
Key Chain would finish automatically.