SIZZIX Big Shot Pro 660550, Instruction Booklet, Page: 8 / 54

7
Using Embossing Folders, Embosslits™ or DecoEmboss™ Dies
1. With Textured Impressions™ Embossing Folder or Embosslits or DecoEmboss
Die open, insert paper, foil or other embossable material, then close like a
book. Place Standard Cutting Pads above and below the closed Folder to
create a “sandwich.”
2. Place “sandwich” on Big Shot Pro Solo Platform and Solo Shim (sold separately)
(Figure F) and place on top of the Adapter Pad in the Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 5.
Using Sizzix® Sizzlits® or DecoEtch™ Dies
1. Place a Sizzlits Die onto a Standard Cutting Pad with foam side up. Place
material over the die. Place another Standard Cutting Pad over the paper or
material to create a “sandwich.”
2. Place “sandwich” on Big Shot™ Pro Solo Platform and Solo Shim (sold separately)
and place on top of the Adapter Pad in the Sliding Tray (Figure E).
3. Follow Steps 3–5 in Operating Instructions, page 5.
Figure E
Figure F
Textured Impressions
Embossing Folder
Cutting Pad
Cutting Pad
Material
Die
Cutting Pad
“Sandwich”
Sliding Tray
Solo Platform
Solo Shim
Cutting Pad
Material
Textured Impressions
Embossing Folder
Solo Platform
Solo Shim
Adapter Pad
Adapter Pad