Operating Instructions
1. Secure side rails to upright and locked position.
2. Lower bed to lowest position.
3. Unplug bed and all accessories from wall and secure cords. If
installed, battery backup will allow for basic bed and blower
functions for a short period of time.
4. Unlock casters at head and foot sections of bed.
5. Press power button and adjust speed control. Move joystick in
desired direction to move and release to stop.
6. Plug bed and all accessories back into wall outlet once
transport is completed.
7. Lock casters and raise frame off Power Drive wheels to ensure
proper RSS function.
Note: Power Drive does not move side to
side, but pivots on drive wheels
Caution:
Keep hands and feet clear
of wheels during bed movement. Move only at slow walking
pace. Check bed and side rail width for clearance in hallway to
prevent damage to bed or other objects.
Caution:
DO NOT push bed with drive wheels on the ground
for longer than necessary, as damage to Power Drive may occur.
Should you experience any type of brake malfunction or are
unable to raise drive wheels, do not use bed. Call for service
immediately!
Warning:
Transport down inclines or over thresholds,
including elevators, can result in damage to bed and injury
to persons. Power Drive is intended for level surfaces, but is
capable of climbing a 5 degree incline if necessary. Extra care
should be taken when transitioning at top and bottom of ramps.
Loss of traction may cause damage to bed and injury to persons.
