6
Unpacking and Set-Up Instructions
Unpacking/Parts Breakdown
Foam Comfort Layer:
..........A layer of high density viscoelastic memory foam for added
patient comfort is laminated to a polyurethane foam layer that is
then laminated to the foam cavity.
Foam Cavity
: ........................A foam cavity is used to contain the air cells and stabilize the
entire surface. This foam cavity provides added edge support and
is tapered at the foot end to provide additional pressure relief in the
heel section.
Air Cells:
...............................24, 12, 9 or 4 foam filled polyurethane air cells are divided into
three separate pressure zones. By utilizing different foam densities
(firmness types) the air cells are specifically designed to meet the
pressure needs for the different zones of the body.
Cover:
....................................The bacteriostatic top fabric is fire resistant, fluid proof, tear
resistant, cleanable and replaceable. It consists of either a nylon
cover, polycarbonate/polyurethane cover or a 4-way stretchable
cover.
Mattress Height:
...................The total pressure management surface height is 7” (18 cm).
Friction/Shear:
.....................All cover choices serve to reduce friction and shear.
Replacement Mattress:
........The mattress can be placed directly on a hospital bed frame.
Pressure Management:
........This combination air/foam replacement mattress system is
designed to provide pressure management in the prevention and
treatment of pressure ulcers.
Fire Barrier:
.........................Internal fire barrier encases internal components in order to meet
all currently designated fire safety codes.
Unpacking Instructions
(no tools required):
Remove the products from the packing material and examine for shipping damage. If damage is
detected in shipping, contact the freight company and file a damage complaint immediately.
