VD32 Remote Controller User Manual v1.2
- 31 -
2020 SIYI Technology Copyright
Mark: Please make sure that the charging current is less than 2A or it may cause damage
to battery.
Mark: VD32 transmitter is equipped with a built-in 8000mAh LiPo 1S battery.
Charging time is about 5 hours using a standard
5V/2A
charger adapter. Charging time may
change according to chargers made under different standards, please also pay an attention
to the charging indicator when you are charging the transmitter.
Charging Indicator Definition
Power Off Charging
Solid Red: Transmitter is under charging.
Solid Green: Charging is finished.
3.3 How to Link/Bind VD30 Transmitter to VD32 Receiver
Each unit of VD32 transmitter is assigned with a unique ID code. Before linking
VD32 receiver to VD32 transmitter, the receiver identifies the transmitter ID
(
Linking/Binding
) first. After the first linking process between the transmitter and
the receiver is done, the transmitter ID will be memorized in the receiver so that you
don’t have to repeat the process before the next flight/operation (except when your
transmitter has to be linked with a different receiver).
Linking/Binding Steps
