FM30 User Manual V1.1
16
2020 SIYI Tech All Rights Reserved
1. at least 1 second each time). Receiver indicator turns to blink red fast, receiver
ready for binding.
2. With OpenTX transmitter under protocol mode, go to “External RF” page in your
radio transmitter and enter…
“Bind”. Under S.Bus/PPM mode, press the binding button on FM30 transmitter for
5 seconds to start binding.
3. Receiver/transmitter turns to blink green; communication is normal, binding is
successful.
WARNING
Before binding, please make sure motors are not powered (E.S.C are off connection).
Reboot receiver when binding is finished and try to manipulate on transmitter to confirm if
binding is successful.
