DK32S Transmitter User Manual (V1.0.3)
- 26 -
2019 SIYI Tech All Right Reserved
3. Find the Micro-USB cable packed with the DK32S transmitter, connect its Micro-
USB end to the Micro-USB port on the back of the DK32S transmitter, and its
USB end to the charger;
4. Plug the charger into adapted AC power outlet;
5. In charging, the charging indicator is solid red; when charging is finished, it turns
to solid green.
Mark
: The DK32S transmitter is equipped with a built-in 3000mAh Li-Po 1S battery.
Charging time is generally between 2.5 to 3 hours using a standard charger with 5V/2A
output. Charging time may change according to chargers with different standard, please also
pay an attention to the transmitter charging indicator when you are charging the DK32S
transmitter.
3.3 How to Link a DK32S Transmitter to a DK32S Sky Station
Each unit of the DK32S transmitter is assigned with a unique ID code. Before linking
a DK32S sky station to a DK32S transmitter, the sky station must identify transmitter
ID (
Linking
) first. After the first linking between the transmitter and the sky station,
the ID code will be memorized in the sky station, so that
you don’t have to repeat
linking next time (except when the transmitter was to be linked with a different sky
station).
