2.4G Datalink User Manual v1.1
3
2020 SIYI Technology Copyright
Do not forget to check battery level of the transmitter and the receiver before starting
your aircraft/vehicle.
Always power off your aircraft/vehicle first, ground station the second.
Before changing any settings for the ground station, make sure your aircraft’s/vehicle’s
engines are powered off and their motor wires are off connection, in case of a sudden switch
on.
When you start your aircraft/vehicle for the first time, make sure that the fail-safe
settings in your transmitter is activated.
Always switch on the transmitter first and hold the throttle joystick at its bottom
position, then power on your aircraft/vehicle.
1.3 Precautions on Storage/Carrying/Recycling
CAUTION
Always place your 2.4G Datalink system at places where babies or kids do not reach.
DANGER
2.4G Datalink system should be placed as below:
Not too hot (above 60℃) or too cold (under -20℃);
Not under direct sunshine or too dusty or too wet;
Not on an unstable holder which lacks of solid supports or may cause vibration;
Not nearby steam or other heat sources.