SixThreeZero PAVE N'TRAIL, Assembly Manual

Page: 22 / 56

H AV I N G T R O U B L E ? WA N T L I V E H E L P ? C A L L 3 1 0 . 9 8 2 . 2 8 7 7 O R E M A I L I N F O @ S I X T H R E E Z E R O. C O M .
Your bike is equipped with a “threadless stem”. It clamps
to the outside of the steerer tube.
1 3 1 5
5 M M
A L L E N K E Y
These bolts are designed to be tighten to correct torque. If you don’t have
access to a torque wrench, we suggest to visit your local bike shop for prop-
er tightening. If you decide to tighten the screws without a torque wrench,
make sure to tighten the bolts until they are snug. Do not overtighten. Bolts
that are too loose can move and fatigue. Bolts that are too tight can stretch
and deform. Either mistake can lead to a sudden failure of the bolt, causing
you to lose control and fall.
N OT E
Loosen the top cap of the fork steerer with a 5mm Allen
key and remove the top cap and bolt. Do not miss place
these components.