Shantou Institute of Ultrasonic Instruments Co., Ltd.
IX
Preface
The CTS-9006/ CTS-9009 digital ultrasonic flaw detector is the perfect combination of various
advanced modern technologies such as ultrasonic flaw detection, computer, electronics, mould,
techniques. Therefore we present a series of digital ultrasonic flaw detectors with higher
performance and more powerful functions to the industry.
Main features of the CTS-9006/ CTS-9009 digital ultrasonic flaw detector:
1
）
Small size —— The dimension of the whole unit is 152mm
×
240mm
×
52mm (W
×
H
×
D). This is the
smallest size among all flaw detectors with a 5.7-inch monitor.
2
）
Light weight —— The total weight of the unit (including battery) is 1.15kg only.
3
）
Low consumption —— Given that the system has small size and light weight, a fully-recharged
battery can support the system to work continuously over 7 hours.
4
）
High performance ——The main technical specifications, such as detection sensitivity surplus,
vertical linearity, horizontal linearity and dynamic range, are much better than the requirements
of China’s national standard.
5
）
Rich functions —— The system is featured with USB port, auto gain control, peak memory, DAC,
AVG. Moreover, the CTS-9009 has many additional functions, such as network communication,
probe frequency measure, cine, curved surface correction and AWS code.
6
）
Easy operation —— The user-friendly system interface is quite intuitive with just a few buttons
for easy definition and simple operation.
This Operation Manual contains the following chapters:
Chapter 1 gives a brief introduction to the system.
Chapter 2 describes system menus and functional operation.
Chapter 3 describes some operation techniques, so as to facilitate the users to operate the system
quickly and conveniently.
Chapter 4 describes the general steps when performing field testing with the system, and gives
some application examples.
Chapter 5 describes how to use peripheral devices, ports and accessories.