4
SETTING UP
The WATERTECH Portable Hot Water System is to be located in a vertical position and partly sheltered from the
elements or the potential to be sprayed by the shower head whilst in operation.
Your appliance is not designed to be used as a permanent shower or supply of hot water.
(Insert Image of all parts & accessories)
2
1. Remove from box and check that all accessories are included. Select a strong, secure and non-flammable
position to locate the shower.
PARTS & ACCESSORIES
Shower Head
& Hose
Pump
& Hose
12V Cord
Regulator &
Quickconnect
Carry Handle
Season
Control
Water
Control
Gas
Control
“D” Cell Batteries
(not included)
Water
Inlet
Gas
Inlet
Water
Outlet
LCD
Temperature
Display
2. Attach the 1 x Gas and 2 x Water adapters to the inlet connections on the base of the unit. Use the supplied Thread
Tape prior to attaching the adapters and ensure all are fitted with the Black Rubber “O” Rings. The Male GAS Adapter
must be tightened with a spanner – DO NOT FINGER TIGHTEN.
IMPORTANT – Failure to include the “O” rings or tightening with a spanner will result in LP Gas & Water leaks
causing failure in operation.
