This manual will introduce you to the design, operating principle and rules of SITITEK BIO3
Ozone Generator (hereinafter referred to as the Product).
The Product is a household appliance used for disinfection of air and surfaces in rooms in the
presence of people and (or) animals.
Exposure of a small concentration of active ozone disinfects the surrounding air and surfaces
within an area of 15-20 m2 / 160-215 ft2 (e.g. apartments, cottages, offices, car interiors).
As a result, the Product oxidizes the air and surfaces in the treated room.
The Product operates for 9 minutes with a performance
of 0.05 mg of ozone per second.
In order to disinfect the room, it is enough to conduct
ozonation only once.
In order to get rid of insects on food or surfaces, it is necessary to use the
Product 6 times within the period of 5 days. It is prohibited to stay in the
treated room or closer than 15 meters (50 feet) to it.
Regular use of the Product makes air fresher and significantly reduces pathogens’ amount.
The Product use can be an effective preventive measure against flu and other respiratory
diseases. Ozonation makes the air purer and eliminates odors.
The Product is not a medical appliance
Attention!
Before using the Product, please, carefully read the supplied User Manual. Following the
instructions, restrictions and guidelines contained in User Manual will extend the life of the
Product and allow you to use it most effectively. Violation of the storage instructions and
operating rules will lead to manufacturer warranty termination.
Attention!
After keeping the Product in cold place or transporting it in winter conditions, leave it at room
temperature for the period of 2 hours before using the Product.
Attention!
The Product is an ozone producer. It is necessary to observe safety precautions listed in the
User Manual.
It is prohibited to use the Product:
• In the presence of nursing infants.
• In the presence of people with allergic reactions.
• In the presence of people or pets, if the Product performs more than 3 times in a row in
the same place.
The Product consists of ABS-housing equipped with the following:
• Ozone generator.
• Ozonizing element made of ceramics.
• Operation mode controller.
• Fan used for air circulation through the housing.
• Switch on button.
Before using the Product, it is necessary to:
• Install the Product on a plain horizontal surface (e.g. a table or a nightstand) or install it in
a car or in an area where insects gather.
• Connect power cord to a power supply.
• Press the button on the backside of the Product in order to switch it on.
Operation modes:
• Ozone generator operates for 9 minutes, then the Product switches to the standby mode.
Характеристики:
Input
220-240V ~ 50 Hz
Output
12 В
–
2 А
Ozone emission
200 mg/h
Power
~ 8 W
Current
0,5 А
Summary of Contents for BI03 PRO
Page 1: ...HOUSEHOLD OZONE GENERATOR ...
