Document NO.:RD-536G-39-001
Version: C 2018.06.19
- 4 -
Practice Fire Safety:
If the alarm sounds, and you have not pushed the test button,
it is warning of a dangerous situation, your immediate
response is necessary. To prepare for such occurrences,
develop family escape plans, discuss them with all household
members, and practice them regularly.
1: Expose everyone to the sound of a smoke alarm device
and explain what the sound means.
2: Determine two exits from each room and an escape route
to the outside from each exit.
3: Teach all household members to touch the door and use an
alternate exit when the door is hot, instruct them not to
open the door if the door is hot.
4: Teach household members to crawl along the floor to stay
below dangerous smoke, fumes and gases.
5: Determine a safe meeting place for all members outside
the building.
What to Do in Case of Fire:
1: Do not be panic; stay calm.
2: Leave the building as quickly as possible. Touch doors to
feel if they were hot before opening them. Use an alternate
exit if necessary. Crawl along the floor, and do stop to
collect anything.
3: Meet at a pre-arranged meeting place outside the building.
4: Call the fire department form outside the building.
5: Do not go back inside a burning building. Wait for the fire
department to arrive.
Note:
These guidelines will assist you in the event of a fire,
however, to reduce the chance that fires will start, practice
fire safety rules and prevent hazardous situations.
Where is the best to be Installed:
·
At first you need install one unit in the bedroom and
routeway, if you have several bedrooms, you’d better
install each alarm in every room. (see Diagram 4).
·
Install it in the stairway and in every floor. ( see Diagram 5)
·
Smoke, heat and burning things will spread horizontally
after rising to the ceiling, so install the alarm on middle of
the ceiling of ordinary structure house let the alarm induce
every corner.
·
Install an alarm in every bedroom.
·
If alarm couldn’t be installed in the middle of the ceiling for
some reasons, the distance which the alarm away from the
wall corner should be beyond 50cm(see Diagram 6).
·
Put smoke alarm at both ends of a bedroom hallway or
large room if the hallway or room is more than 9.1 m (30
ft) long.
·
Install smoke alarms no slopped, peaked or cathedral
ceilings between 500 and 1500mm from the highest
point of the ceiling. Smoke alarms in rooms with ceiling
slopes greater than 1m in 8 m horizontally shall be
located on the high side of the room (See Diagram 7)
Warranty Information:
Company warrants to the original consumer.
Purchase each new smoke alarm device to be free from
defects in material and workmanship under normal use and
service for a period of 3 years from the date of purchase. This
warranty does not cover damage resulting from accident,
misuse or abuse or lack of reasonable care of the product.
In no case shall company be liable for any incidental or
consequential damages for breach of this or any other
warranty express or implied
，
whatsoever. The bad product
can be mailed to the following address with a detail
explanation of problem.
Installation:
·
Take off the bracket from the alarm body.
·
Press the bracket on the installation position, mark
installation hole of the bracket with pencil.
·
Bore two installation holes on the sign with electric drill.
Make diameter of holes is 5mm, Strike the two plastic
plugs into holes with hammer.
·
Attach the bracket to the plastic plugs and fix tightly the
screws into the plastic plugs. (Refer to Diagram 8).
·
Fit the alarm on the bracket and turn the alarm body
clockwise, until matching well on the bracket.
·
Press the button for test the unit. The alarm sounds 3
beeps – 1.5 seconds pause, repeat it until release the
button, if no sound, it indicates a defective alarm, you
can refer to ”Trouble shooting” for solution or return to
your retailer during warranty.
·
If you have any questions on installation, you can contact
your retailer.
