Document NO.:RD-528A-39-001
Version: E 20170920
- 6 -
MULTIPLE FLOOR PLAN
Diagram 6
Installation:
Turn the alarm body counterclockwise and take off the
bracket.
Hold the bracket in the installation position as specified in
the Recommended Locations, mark installation holes of the
bracket with pencil.
Drill the two marked installation holes with a 3/16 inch
(5mm) drill bit. Tap the two plastic grommets into holes
with hammer.
Mount the bracket to the ceiling by inserting and tightening
the supplied screws into plastic grommets. (Refer to
Diagram 7).
Connect the battery to power connector.
Fix the battery into battery box.
Fit the alarm on the bracket and turn the alarm body
clockwise, until fully inserted on the bracket.
Press the button to test the unit. The alarm should then sounds
3 beeps – 1.5 seconds pause, and will repeat until the button
is released, if no sound, it indicates a defective alarm, refer to
the ”Trouble shooting” section for a solution or return to your
retailer during warranty.
Diagram 7
WARNING:
To prevent injury, this unit must be securely attached to the
wall or ceiling in accordance with the installation instructions.
SERVICE AND WARRANTY
Company warrants to the original consumer. Purchase each
new smoke alarm to be free from defects in material and
workmanship under normal use and service for a period of 3
years from the date of purchase. This warranty does not cover
damage resulting from accident, misuse or abuse or lack of
reasonable care of the product. In no case shall company be
liable for any incidental or consequential damages for breach
of this or any other warranty express or implied
，
whatsoever.
The bad product can be mailed to the following address with a
detail explanation of problem.
If after reviewing this manual you feel that your smoke alarm
is defective in any way, do not tamper with the unit. Return it
for servicing to:
SITERWELL ELECTRONICS CO., LIMITED
ADDRESS: NO.76 HAICHUAN ROAD CHUANGYE
ZONE B, JIANGBEI,NINGBO,CHINA
TEL:0086-574-87729581
FAX:0086-574-87729581
E-MAIL:[email protected]