16
b. Drain the gasoline in the fuel tank.
c. Assemble the screw in float room.
d. Renew the oil.
e. Take off the spark plug, put a spoonful of clean engine oil into cylinder.
Turn the engine several revolutions to make the oil spread evenly.
Then reinstall the spark plug.
f. Take the handle of the starter into your hand until you feel resistance.
Then pull it to the triangle mark and hole of screw in the same line. In
this position, both the inlet and outlet are closed - which is better for
avoiding rust.
g. Cover the water pump.
Summary of Contents for SP50
Page 5: ...5 5 Main Part Names ...
