Sitecom WL-370 User Manual Download Page 10

Page: 10 / 63

E |3

5 N System Requirements

To begin using the WL-370, make sure you meet the following as minimum

requirements:

•

PC/Notebook.

•

Operating System – Microsoft Windows XP/2000/VISTA /7

•

1 Free Ethernet port.

•

WiFi card/USB dongle (802.11 b/g/n) – optional.

•

External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).

•

PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)

•

Ethernet compatible CAT5e cables.

6 WL-370 Placement

You can place the WL-370 on a desk or other flat surface, or you can mount it

on a wall. For optimal performance, place your Wireless Broadband Router in

the center of your home (or your office) in a location that is away from any

potential source of interference, such as a metal wall or microwave oven. This

location must be close to a power connection and your ADSL/Cable modem.

Summary of Contents for WL-370
































































Search results

Summary of Contents for WL-370

Reviews:

Brands by name

Popular brands

Sitecom WL-370, User Manual

Search results

Summary of Contents for WL-370

Reviews:

Brands by name

Popular brands