Sitecom WL-346 User Manual Download

Page: 4 / 59

Key Features

Features

Advantages

Incredible Data Rate up to
150Mbps**

Heavy data payloads such as
MPEG video streaming

IEEE 802.11n draft 2.0 Compliant
and backward compatible with
802.11b/g

Fully Interoperable with IEEE
802.11b / IEEE802.11g
compliant devices with legacy
protection

Four 10/100 Mbps Fast Switch Ports
(Auto-Crossover)

Scalability, extend your network.

Firewall supports Virtual Server
Mapping, DMZ, IP Filter, ICMP
Blocking, SPI

Avoids the attacks of Hackers or
Viruses from Internet

Support 802.1x authenticator,
802.11i (WPA/WPA2, AES), VPN
pass-through

Provide mutual authentication
(Client and dynamic encryption
keys to enhance security

Integrated modem (Annex A)

Fully compatible with the
fastest ADSL2+ connections up-
to-date.

** Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g, n chipset

used. Actual throughput may vary. Network conditions and environmental factors

lower actual throughput rate. All specifications are subject to change without notice.

Summary of Contents for WL-346




























































Search results

Summary of Contents for WL-346

Reviews:

Related manuals for WL-346

Brands by name

Popular brands

Sitecom WL-346, User Manual

Search results

Summary of Contents for WL-346

Reviews:

Related manuals for WL-346

Brands by name

Popular brands