Sitecom WL-303 User Manual Download | Manualshive

Page: 58 / 61

background image

Parts of the firmware of the WL-326 Wireless Broadband router are subject to the

GNU general

public license.

Appendix A: Licensing Information

This product includes third-party software licensed under the terms of the

GNU General Public

License.

. You can modify or redistribute this free software under the terms of the

GNU General

Public License.

Please see Appendix B for the exact terms and conditions of this license.

Specifically, the following part of this product is subject to the GNU GPL:

#

Package name

Source

1

Linux v2.6.21

www.kernel.org

2

Iptables v1.3.5

www.netfilter.org/

3

Bridge-utils v1.2

bridge.sourceforge.net/

4

Busybox v1.7.5

www.busybox.net/

5

Rp-pppoe v3.8

freshmeat

.net/projects/rp-pppoe/

6

Pptp-client v1.7.1

pptpclient.sourceforge.net/

7

Ppp v2.4.3

ppp.samba.org/

8

Udhcp v0.9.9-pre

udhcp.busybox.net/

9

iproute2 v2.6.16-060323

www.linux-foundation.org/en/Net:Iproute2

10

Dnsmasq v2.39

www.thekelleys.org.uk/dnsmasq/doc.html

11

Ez-ipupdate v3.0.11b8

ez-ipupdate.com/

12

Libupnp v1.6.0

upnp.sourceforge.net/

13

Wireless-tools v28

RaLink SDK 3.1.0.0

14

U-boot v1.1.3

RaLink SDK 3.1.0.0

15

gcc-3.3.6

RaLink SDK 3.1.0.0

16

Uclibc-0.9.29

RaLink SDK 3.1.0.0

Availability of source code

Sitecom Europe BV has made available the full source code of the GPL licensed software,
including any scripts to control the compilation and installation of the object code

in the driver

section of this product.

No Warranty

The free software included in this product is distributed in the hope that it will be useful, but
WITHOUT ANY LIABILITY OF OR ANY WARRANTY FROM THE LICENSOR.

Appendix B: GNU GENERAL PUBLIC LICENSE

Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place

- Suite 330, Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute
verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it.

By contrast, the GNU General Public License is intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its users. This General Public

License applies to most of the Free Software Foundation's software and to any other program
whose authors commit to using it. (Some other Free Software Foundation software is covered

by the GNU Library General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public

Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get it if

«
...
56
57
58
59
60
...
»

Summary of Contents for WL-303






























































Reviews:

No comments

Related manuals for WL-303

Brand: Hama Pages: 180

Brand: Watchguard Pages: 2

Brand: Hirschmann Pages: 42

Brand: Global Telecom Pages: 5

Brand: Pakedge Device & Software Pages: 45

RangeMax NEXT WNR834A

Brand: NETGEAR Pages: 106

Brand: NETGEAR Pages: 2

WAP-1000 WireFree

Brand: Planet Pages: 28

Brand: APM Pages: 2

Brand: Abramtek Pages: 8

Brand: Huawei Pages: 2

Brand: Huawei Pages: 52

Brand: Huawei Pages: 57

Brand: Huawei Pages: 20

Brand: Huawei Pages: 24

Brand: Huawei Pages: 22

OptiXstar P622E

Brand: Huawei Pages: 19

Brand: Huawei Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands