WL-108 Wireless Network Modem/router 11M
8
Setting up the Modem/router
Physical installation
1.
Ensure the Wireless ADSL Router is powered OFF.
Installation - WL-108
2.
Connect the LAN cables: For the WL-108, use standard LAN cables to
connect the PCs to the LAN ports (hub) on the broadband
modem/router. If necessary connect the "Uplink" port to a standard
port on another hub. You must use a standard LAN cable for this.
Note: If you use the "Uplink" port, then port 4 CANNOT be used.
3.
Connect the supplied ADSL cable from the WAN port on the Wireless
ADSL Router (the RJ11 connector) to the ADSL terminator provided by
your phone company.
4.
Your wireless PC’s need some configuration which is explained later on
in this manual.
5.
Connect the power supply adapter to the broadband modem/router.
Use only the adapter supplied with the router.
6.
Check the LEDs
•
The Power LED should be ON.
•
The Status LED should flash, then turn Off. If it stays on, there is a
hardware error.
•
For each LAN (PC) connection, the LAN Link/Act LED should be ON
(provided the PC is also ON.)
•
The WAN LED should be ON.
