3
Receiver
Supply voltage
6.0 V (four 1.5 V AA batteries)
Ambient temperature ratings
0 - 60 °C (32 - 140 °F)
Radio frequency
315 MHz
TECHNICAL DATA
ENGLISH
Preliminary check of the Receiver
Operations to be done, before switching on the Remote Control:
•
Check that the electrical connections are in accordance with Fig. 2.
FUNCTIONS
Initializing the System for the first time
Install the 4 AA batteries into the receiver battery bay. Note the polarity of the battery and insert into the
battery bay as indicated on the Battery cover (+/-). Place the 3 position slider switch in the “Remote” position.
(Fig. 1) Using the end of a paper clip, or other similar object, insert the end of the paper clip into the hole
marked “PRG” on the Receiver front cover (fig 1). The Receiver will “beep” three (3) times to indicate that it is
ready to synchronize with a Transmitter. Install the 3 AAA type batteries in the Transmitter battery bay, located
on the base of the Transmitter. With the batteries already installed in the Transmitter, push the On button. The
Receiver will “beep” four times to indicate the Transmitter’s command is accepted and sets to the particular code
of that Transmitter. The system is now initialized.
Fig. 2:
Wiring diagram.
REMOTE
REMOTE
120V OUT
TP
TH
TPTH
MOTOR
RECEIVER
FCM-COM
Green
White
Red
Black
(+) (-)
Pink
Blue
Receiver 14
Pin Connector
Split Flow
