Right side
Front Leg (FR)
(identification marks
facing up)
J
Under Arm
brace
FRONT
Right side
Rear Leg (RR)
(identification
marks
facing up)
J
1a - Attach part ( K ) under arm brace to part ( J ) front right side ( FR ) & Rear right side ( RR ) legs using 4 of screws.
( G ) 2 for each leg. Tighten screws using a phillips-head screwdriver. Be sure to lay the legs and arm brace on
a flat clean surface to assemble. Line up the front right leg ( FR ) with the front of the arm brace ( 2 screws ),
line up the rear right side leg ( RR ) with the back of the arm brace (1 screw). Make sure the identification marks
FR & RR are facing upward. Follow the same instructions for left side legs ( Q ), the identification marks FL & RL
should be facing down. Leg and arm brace assembly should form an "A" frame if done correctly.
1b - To Attach part ( J ), Right leg Assembly to part ( L ) arm, lay arm face down on a flat clean surface, place ( J )
right side leg assembly over the arm using ( 6 ) of screw ( G1 ) tighten screws using a phillips-head screwdriver.
Follow the same instructions for left side legs ( Q ).
FR
RR
FR
RR
K
Right side
Rear Leg (RR)
(identification marks
facing up)
J
Right side
Front Leg (FR)
(identification marks
facing up)
J
Figure 1
Left side
Front Leg (FL)
(identification marks
facing down)
Q
Under Arm
brace
FRONT
K
Q
Left side
Rear Leg (RL)
(identification marks
facing down)
Left side
Rear Leg (RR)
(identification marks
facing down)
Under Arm
brace
FRONT
K
Left side
Front Leg (FR)
(identification
marks
facing down)
BACK
Arm
L
Q
Q
1b
1a
Under Arm
brace
FRONT
K
BACK
Arm
L
G1
G1
G
G
