2b - Attach part ( H ), seat back assembly, to part (M), seat bottom assembly, as shown in Figure1 see detail
2 using ( 4 ) of screws ( A ) , 2 on each side, tighten screws using a phillips-head screwdriver.
A
( Detail 2 )
( Detail 1 )
2a - Attach part ( H ), Seat Back Assembly, to part (M), seat bottom assembly
you must align the lower front
edge of Yoke to hide the front edge of groove, see detail 1.
front edge of groove
front edge of Yoke
M
( Seat Bottom Assembly )
( Seat Back
Assembly )
H
Figure 3
Figure 2
3a - Attach part ( J ), Right side front and rear leg assembly, to assembly from Figure 2 as shown in Figure 3,
identification marks ( FR ) and ( RR ) facing inside towards the seat see detail 3, using ( 2 ) of joint connector
bolts ( B ), ( 2 ) washers ( C ), ( 2 ) lock washers ( D ), ( 2 ) hex nuts ( E ), see detail 4 tighten bolts using an allen
wrench and also an adjustable wrench follow the same instructions for left side front and rear leg assembly.
I
(Left Side
Front & Rear leg)
F
( Detail 5 )
( Seat Back
Assembly )
H
F
B
( Detail 4 )
J
B
B
F
C
D
E
identification marks
(Right side
Front & Rear leg)
(FR)
(RR)
( Detail 3 )
3b - Attach part ( I ), Left side front and rear leg and part ( J ), right arm leg assembly, to seat back assembly ( H ), as
shown in Figure 3, see detail 5, using ( 3 ) of lag screws ( F ), tighten screws using and allen wrench. Follow the
same instructions right side front and rear leg assembly.
