Figure 4
Figure 5
5 - Attach the Assembly from figure 4, ( Glider Seat ) to Assembly from Figure 3, ( Glider Base ) as shown in Figure 5
see detail 7 using for each leg ( 1 ) of joint connector bolts ( B ) , ( 2 ) washers ( D2 ),( 1 ) Lock washers ( E2 ) and
( 1 ) hex nuts ( F2 ), tighten bolts using an allen Wrench and also an adjustable wrench.
B
D2
E2
F2
( Detail 7 )
( Detail 6 )
( Seat Back
Assembly )
( Detail 5 )
D1
E1
F1
identification marks
(Right side
leg Assembly )
(FR)
(RR)
( Detail 4 )
(FR)
4,a - Attach part ( J ), Right side front and rear leg assembly, to assembly from
Figure 2 as shown in Figure 4, Make sure identification marks ( FR ) and ( RR )
are facing inside towards the seat see detail 4, using ( 2 ) of joint connector
bolts ( A ), ( 2 ) washers ( D1 ), ( 2 ) lock washers ( E1 ), ( 2 ) hex nuts ( F1 ), see
detail 5 tighten bolts using an Allen wrench and also an adjustable wrench.
Follow the same instructions for left side front and rear leg assembly.
4,b - Attach part ( J ), Right side front and rear leg and part to seat
back assembly ( H ), as shown in Figure 4, see detail 6, using
( 1 ) of lag screws ( C ), tighten screws using and allen wrench.
Follow the same instructions for left side front and rear leg assembly.
A
A
C
C
H
A
C
J
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST