Sistemes Electronics Progres Agronic Smart, User Manual

Page: 3 / 32

Manual - Agrónic Smart ·
3
2. Specifications
10 outputs (10 sectors, or 8 sectors with
general and fertilizer outputs)
• 2-wire, 2-inverted-wire and 3-wire outputs
• Output activation voltage may be selected
from: 13V, 19V, 5V (4700 µF condenser)
2 digital inputs
‒ Meter/rain gauge
‒ Digital sensor (temporary stop,
conditional stop, start program)
Sectors
‒ Designation of name for each sector
‒ Specification of time for water hammer
and “stop by sector”
Programs
‒ 5 programs
‒ 10 sectors/program
‒ Various sectors (up to 10) may be
grouped into the same program to
irrigate at the same time.
‒ Specification of irrigation time and
fertilizer for each sector
‒ 5 start hours per program
‒ Irrigation on specific days or by
frequency of days
‒ Start based on schedule, manually or by
digital input
‒ Plus version:
∙ Alternating sequence: Each time
the program starts, it will do so in a
different sector, in accordance with the
defined sequence.
∙ Fertilizer: Use of fertilizer and
specification of fertilization time for
each sector in the program sequence.
Manual actions accessible from the Agrónic
Smart app:
‒ Controller: Set the clock
‒ Controller: Enter/Exit Stop
‒ Controller: Enter/Exit Out of service
‒ Program: Start/Stop a specific program
‒ Program: Erase 1 or all programs
‒ Program: Place in Out of service
‒ Program: Pause for a certain amount
of time
‒ Program: Specify a particular manual
factor (=variation in program time)
‒ Sector: Start/Stop/Automatic
‒ Totals: Erasure (coming soon)
Basic manual actions available through the
use of a button:
‒ Output test
‒ Activation of programs
‒ Activation of sectors
‒ Battery test
‒ Reset PIN