SUPPLIED MATERIAL
BOX FORMAT ASSEMBLY
Installation option SDI-12 + 4
analogue inputs
Agrónic 2500
Disconnect power from the
controller.
1
Remove the four screws that
hold the keyboard.
2
Remove the three inner
bars on the right side of the
drawer with a chisel/file, as
shown in the image.
5
Unscrew and remove the two
plates from the controller.
3
Make two holes in the box as
shown in the image using the
attached template.
4
Diameter
13 mm
64 mm
77 mm
23 mm
41 mm
Use a template to make the
holes. If the holes are not made
exactly as they should be, the
components will not fit.
IMPORTANT
SDI-12
board and
4 analogue
inputs
Terminal
Adhesive labels
Two SHR
screws
Cable 4 interior
analogue inputs
Interior SDI-
12 cable
Exterior SDI-
12 cable
Cable 4 exterior
analogue inputs
Board link cables
•
Interior SDI-12 cable
•
Exterior SDI-12 cable
•
Cable 4 interior
analogue inputs
•
Cable 4 exterior
analogue inputs
•
SDI-12 board and 4
analogue inputs
•
Terminal
•
Board link cables
•
Two SHR screws
•
Adhesive labels
•
Template for holes
