MINICOOL SQUARE
MODEL : S7281
INSTRUCTIONS SHEET
PAGE: 5 of 5
2" JUNCTION BOX INSTALLATION (J2) - INTEGRAL DRIVER 120-277V (UNV)
INS-479
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
JP - R2
Last update: February 18, 2020
A- INSTALL THE MOUNTING PLATE ON THE 2" JUNCTION BOX USING (
2
) PHILLIPS SCREWS (
INCLUDED
).
MAKE SURE THE JUNCTION BOX IS PROPERLY ALIGNED.
B- UNFASTEN THE SET SCREWS WITH AN ALLEN KEY (
INCLUDED
) AND DISCONNECT THE QUICK CONNECTOR TO REMOVE THE FIXTURE
FROM THE BASE. DO NOT COMPLETELY REMOVE THE SET SCREWS.
C- MAKE WIRE CONNECTIONS (
FOLLOWING POLARITY MARKING
) USING TWIST CONNECTORS (
NOT INCLUDED
)
D- USING (
2
) PHILLIPS SCREWS AND (
6
) WASHERS (
INCLUDED
), INSTALL THE FIXTURE BASE TO THE MOUNTING PLATE.
*TO GUARANTEE A WATERTIGHT INSTALLATION, MAKE SURE TO INSERT THE WASHERS IN THE CORRECT ORDER (
SEE BELOW
).
E- RECONNECT THE QUICK CONNECTOR.
F- FASTEN THE FIXTURE ON ITS BASE WITH THE SET SCREWS WITH AN ALLEN KEY (
INCLUDED
).
A
B
OR
JUNCTION BOX ALIGNMENT
HORIZONTAL
VERTICAL
E + F
SET SCREWS
ALLEN KEY
(INCLUDED)
FIXTURE
FIXTURE
BASE
JUNCTION
BOX
MOUNTING PLATE
PHILLIPS SCREWS
(INCLUDED)
SET SCREWS
ALLEN KEY
(INCLUDED)
FIXTURE
BASE
FIXTURE
QUICK CONNECTOR
E
F
1
2 x
RUBBER
WASHER
*ORDER MUST BE RESPECTED TO GUARANTEE
WATERTIGHT INSTALLATION
2
2 x
METAL
WASHER
3
2 x
NYLTITE
WASHER
C
C + D
C
1 2
D
TWIST CONNECTORS
(NOT INCLUDED)
PHILLIPS SCREWS
(INCLUDED)
