TECNO Star Dual Power instruction manual
14
23/10/13 Rev:2.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
9 - INSTALLATION
- WARNING -
THESE PROCEDURES MUST BE CARRIED OUT
BY QUALIFIED STAFF
9.1 Preliminary operations
The suction system is shipped to the customer completely assembled and packed
Before switching the machine on, the following checks are advisable:
• Check that the packaging is intact.
• Check that the appliance has not been damaged in any way and in particular check that all the protrud-
ing parts are intact.
• Verify the correct tightening of the
fi
lter cartridge.
• Using the equipment list and the kit and accessories list, check that the equipment and the kit have
been exactly and completely delivered.
• Check that the Guarantee Certi
fi
cate has been provided.
If any damage or irregularity is found or if any accessory is missing, do not install the appliance and
contact your Retailer.
9.2 Recommended installation
The Tecno Star Dual Power vacuum cleaner must be connected to an exhaust air pipe, crucial for
discharging outside the micropowders that the
fi
lter cartridge cannot retain. The vacuum cleaner must
be installed in service rooms (e.g. garage, store room etc) protected from bad weather, dampness and
excessive temperature variations. Install the unit in a place far from heat sources such as stoves and
radiators. (N.B: the unit features IP 20 protection degree).
During the set up phase, we suggest to always carefully check that the unit is positioned in the most
suitable location selected for the system. Check also that suf
fi
cient space has been allowed for instal-
lation, use and maintenance purposes and for an optimal recirculation of the air around the vacuum
cleaner.
Construction features allow the vacuum cleaners to be connected to the pipe system with pipes com-
ing either from right or left sides. In case of multi-storey vacuum cleaning system, we suggest you to
install the unit on the lowest available
fl
oor.