7. Operation with a netbook / laptop
The scope of delivery offers you 11 interchangeable adapter tips fitting the most leading
international brands and their netbook/laptop models. Make sure to find the best mechanically
fitting adapter tip for your computer and then connect it to the high-power output cable of the
SWISSCHARGER “ONE”. After that plug this cable into your portable computer. That followed
please make sure that the slide-switch of the charging device is in the right position for the “auto-
detection” mode. Only then you should connect the charger to the power source.
As the automatic scan for the right voltage (DPS) continues, the indicator LEDs remain
flashing for about 30 seconds. Once the scan could find a corresponding voltage, one particular
voltage indicator is marked by a glowing LED behind the voltage value.
In case the automatic scan fails, the blue indicator LED (STD) starts flashing . In that case
please disconnect the charger from the power source and wait until all LEDs go out. Then
change the slide-switch to the “manual-control” mode and connect the charger to the power
source again. Now you can choose the voltage your portable computer needs by pushing the
black round button below the voltage selection panel. It is not possible to use this charger with
laptops that drain more than 65W/3 Ampere.
Useful advice:
You could try to operate your laptop with its internal battery removed (means: no
additional charging current), or to charge your laptop while it remains turned off (means: no
additional operating current).
8. Operation using the DC 5V USB high power socket combined with the 12V universal plug
There are thousands of applications for the 12V Universal Port, such as lamps, pumps, satellite
phones, mobile radio sets and many more. For those please use the pluggable cigarette lighter
adapter . The corresponding car cigar jacks have to be designed for an power input of 12-
24V. Devices like the iPad or several netpads that need the high power USB port of 2,1A at 5V
can be connected by using the 2,1A cigarette lighter adapter.
9. Operation of the SWISSCHARGER „ONE“ combined with the SWISSBATTERIES
PowerTankXXL
The SWISSCHARGER “ONE” device is the best compatible charger for the “PowerTank XXL”
portable storage battery. It can be used by plugging it to alternating current sources like any
wall socket as well as standard 12V direct current sources you may find in cars or on boats.
Simply connect the high power output of the SC-ONE to the input socket of the PowerTank
XXL. The voltage adjustment is either performed the automatic way or manually by setting the
voltage to 16V.
Attention: In case the PowerTank XXL is fully charged, the voltage adjustment cannot be
performed by the automatic mode (the internal current input remains switched off). The
SWISSCHARGER ONE must be only connected to the POWER INPUT of the PowerTank and
NEVER EVER to the power output (to avoid excessive current consumption)!
Thanks to the high output rate of the SWISSCHARGER ONE it is possible to fully charge the
PowerTank XXL within as little as 2.5 hours.
10. Operating the SWISSCHARGER “ONE“ with solar systems
Due to the high performance and power of the SC-ONE the current consumption of the device lies around 8 ampere. Thus, the direct connection is only
possible to sufficiently dimensioned solar plants.
Useful advice: in case of undersized solar panels you may consider the usage of a 12V car battery as a buffer device and suitable storage battery.
11. Technical specifications
Dimensions
: 13 x 65 x 1.7 cm
Weight
: 240 gr.
Power output
: 65 W
AC Input
: 100V –240 Volt / 50-60 Hz / 1.5A
DC Input
: 11V – 13.8 Volt / 3.0 A
DC Output
: 12 – 20V / 3.0A
USB Output
: DC 5V / 1.0A
Protective features
: automatic monitoring inhibits short circuits,
overheating, overload and undervoltage
Operating temperature : -30 to 55°C
Efficiency
: 87 %
Patent number
: 2006100284070
13. Warranty
This quality product is manufactured according to the highest standards. Please pay attention to the very few, but highly important operating instructions
within that manual. If you don’t follow these instructions, your guarantee claims will expire.
Please use original parts only. All cables, plugs and accessories have to be provided or otherwise approved by the SIStech AG. SIStech does not take
over warranty for any device connected.
13. Safety
The SWISSCHARGER SC-ONE had been evaluated, safety tested and certified according to the current CE, FCC, UL, GS, TUV, E-mark and SAA
standards.
It is intended for indoor use only. Please protect the device from moisture, dirt, acrid fumes, high temperature and damage. Attention: while operated at
full capacity the device tends to exceeding warm-up.
© 2011 •
SIS
tech
AG (Schweiz), Industriestrasse 116, CH 8608 Bubikon-Zürich •
www.sistech.com