
This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 20/3 - Last updating 10/2019
TS-BASE Manual for use and maintenance
28
TS
BASE
6
EN
6 PRESSURE
6.1 Pressure setting
The pressure adjustment knob is positioned at the centre of the heating plate.
Adjust the pressure by rotating the knob clockwise to increase pressure and anti-clockwise to
decrease it.
If the pressure set does not provide the expected results, simply change it by rotating the
adjustment knob again clockwise or anti-clockwise whether you want to increase or decrease
the pressure.
NOTE:
Remember to always adjust pressure based on the type of fabric used since its thickness can
influence the pressure.
WARNING:
Do not force close the press in the event of excess pressure to avoid damaging the machine.
This damage is not covered by warranty.
Pressure adjustment knob
Summary of Contents for TS-BASE
Page 50: ...SISER S r l 2019 Notes...
Page 51: ...TS BASE Notes...