2.4 GHz/5 GHz Wireless Network
This page displays the current status of the Wireless settings of
the SWM 3530.
OperationMode: Select Operation Mode. The SWM 3530 supports
two different operation modes: Access Point, or WDS (WDS AP, WDS
Bridge, and WDS Station).
Wireless Mode: Supports 802.11b/g/n mixed mode in 2.4
GHz and 802.11ac/a/n mixed mode in 5 GHz.
Your selection may affect the Auto channel feature.
Transmit Power: Sets the power output of the wireless signal.
Data Rate: Select a data rate from the drop-down list. The data rate
affects throughput of data in the SWM 3530. Select the best
balance for you and your network but note that the lower the data
rate, the lower the throughput, though transmission distance is
also lowered.
RTS/CTS Threshold: Specifies the threshold package size for RTC/CTS.
A smaller number causes RTS/CTS packets to be sent more often
and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data packets into one packet. This option
reduces the number of packets, but also increases packet sizes.
AP Detection: The AP Detection feature can select the best
Channel HT Mode: The default channel bandwidth is
20 MHz/40 MHz.
The larger the channel, the greater the transmission quality and
speed.
Extension
Channel: Select the upper or lower channel.
channel to use by scanning nearby areas for Access Points.
Distance: Specifies the distance between Access Points and
clients.
Note
that
longer distances may drop higher-
speed connections.
29