Detach the cold water supply hose from the cold water supply valve.
Attach the Quick Tee adapter inlet to the cold water supply valve outlet.
Attach the cold water supply hose to one Quick Tee adapter outlet.
Attach end of plastic supply tube to other outlet on Quick Tee adapter valve.
Route plastic supply tube up to SupraH
2
Water System.
UNDER-COUNTER CONNECTION (Figure 2)
PRODUCT WATER SUPPLY CONNECTION
Locate the quick connector on back of machine below black water supply valve and
rotate outward.
Insert end of plastic tubing into quick connector.
CONNECT POWER
Connect power jack to the port on the back of product.
Plug in the power cord.
WARNING
Sisel strongly recommends that you hire a licensed plumber to ensure
proper installation and to prevent possible damage.
Rubber
Sealing Ring
Diverter Valve
Adapter
Faucet Diverter
FIGURE 1
Existing Water Line
to Faucet
New Suppy Line
Quick Tee
Adapter
Supply Stop
FIGURE 2
ATTENTION
The SupraH2 can be connected directly to the cold water supply. In order
to do so,
additional materials will need to be purchased separately
including a quick tee adapter and corresponding fittings.
INSTALLATION OF SUPRAH
2
ULTRA WATER SYSTEM
WARNING
DO NOT CONNECT TO HOT WATER!
Hot water may produce scale which can damage machine. Do not use the
device for filtering and ionization of other liquids than water. Do not use
the device if it appears to have been damaged in shipment.
ATTENTION
The SupraH2 Ultra Water Machine was designed for use with water from
municipal water departments. Untreated water high in mineral content
from private wells or other natural sources may damage the Supra H2’s
components; in such cases, we strongly recommend installing a system
to remove minerals. Sisel is not responsible for damage caused from the
use of untreated water.
PRODUCT PLACEMENT
Place the product indoors on an even and stable place away from open flame or
freezing areas but within easy access to power and water supplies.
FAUCET CONNECTION (Figure 1)
Remove the aerator screen (if any) from the faucet. Use the included faucet adaptors
to attach water diverter (also included) to the faucet.
Insert end of plastic supply tube into quick connector on water diverter.
Water
Outlet
Hydrogen
Generator
Receptacle
Stand
Carbon
Filter
UF
Filter
Water Supply
Valve
Power
Water
Inlet
“Pure”
& “H
2
”
Buttons
“Start”
Button
