6 / 8
Please note: Crashing down items can cause serious injuries! Do not install the projector, if you doubt
the safety of a possible installation form!
Mount the device with the mounting-bracket to your trussing system using an appropriate clamp.
During overhead installation the device must be always secured by a safety rope which is designed to
hold the twelvefold weight of the device. Only safety ropes with chain link elements may be used.
Hang up the safety rope in the designated hole attached to the device or in the mounting bracket.
Direct the rope over the truss or an appropriate fastening point. Hang up the end in the fastening
element and tie up the locking nut.
The maximum drop exceed must not exceed 20cm.
A safety rope once exposed to failing load or damaged may not be used furthermore.
Adjust the desired inclination angle via the mounting bracket and tighten the screw.
2. Introduction
Thank you for buying the S612A Speaker.
It is a powerful device.
For a successful installation and operation, please read this manual carefully.
3. Connections
3.1. Electrical connections
If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the
mains with the enclosed power cable and plug. The earth has to be connected.
Cable (EU)
Cable (US)
Pin
International
Brown
Black
Live
L
Light blue
White
Neutral
N
Yellow/Green
Green
Earth
Summary of Contents for S612A
Page 1: ...Manual Speaker S612A...
