2.3. Back view
1. Volume MP3
Controls the volume of the MP3 Player.
2. Clip LED
If this LED lights up you should decrease the master volume. Otherwise an overload of
the system can occur.
3. Power LED
This LED lights up if the device is switched on.
4. Master volume
Controls the master volume of the system.
5. Output XLR
Output of the main signal.
6. Power connection
7. Power switch
8. XLR/Chinch Line in
Here you can connect an audio source with a XLR- or RCA connector. The volume control
is above the RCA connectors.
9. EQ section
With the EQ section you can adjust bass and treble.
10. Input chain 6,35mm
Here you can connect a microphone or another audio source via a chain. Make sure that
the gain is set to -
∞ before connecting an audio source. Assure before connecting if you
connect a line or microphone audio source. Press the button above the chain input.
Pressed means a microphone is connected, depressed means a line signal is connected.
You can set the volume with the gain-poti.
11. SD-Card Slot
12. USB Slot
13. Control MP3-Player
13.1
Play/Pause
Starts or pause the playing.
13.2
Stop
Stops the playing
13.3
Repeat Track Repeats the song.
5 / 8
Summary of Contents for KF-12A
Page 1: ...Manual Speaker KF 12A ...