Power Management
1. Adapter Power Supply
Input: 100-240V~50/60Hz 2.5A, output: 16.8V 5A
2. External Battery Power Supply
Load two NP-F970 batteries into the battery compartment. Slide the battery
case on top of the C60R. ( The battery case cannot charge the batteries.
Please make sure there are at least two batteries in the compartment.)
Operation
1. Power On/Off
When powered by batteries, press the switch to the right (II) to turn on the
light and return the switch to the middle to turn off the light.
When powered by the adapter, press the switch to the left (I) to turn on the
light and return the switch to the middle to turn off the light.
2. Mode Selection:
Hit the SET dial to choose from the CCT mode, FX mode, HSI mode, and
CTO GEL mode.
CCT
100%
2800K
Color Temperature
Brightness
2.1 CCT Mode
2.1.1 Color temperature adjustment: turn the SET dial to adjust the color
temperature in at least 100K increments from 2800K to 6500K.
2.1.2 Brightness adjustment: turn the DIM dial to adjust the brightness in
at least 1% increments from 0% to 100%.
2.1.3 G/M value adjustment: hit the DIM dial to select the G/M value. The
value is adjustable from -50 to +50.
