Siruba HSM-2722, Instruction

Page: 14 / 35

- 13 -
DRAWING UP THE BOBBIN THREAD
1. Hold the upper thread with left hand,
turn the hand wheel slowly towards
you until the needle goes down and
comes up. Then stop the hand
wheel when the take up lever is at
its highest position.
Lightly draw up the upper thread, by
which the lower thread will be
brought up in a loop.
2. Pull out both threads and place
them together under presser foot to
the rear of the machine.
3. Place fabric under pressure foot
from the front, lower pressure foot.
4. Start to sew.
CHANGING SEWING DIRECTIONS
1. Lower needle down into fabric and
raise presser foot, pivot the fabric
around the needle to change
direction as desired.
2. Lower the presser foot and start to
sew.