SIRS NAVIGATION LTD
COMPONENT MAINTENANCE MANUAL
STORAGE INSTRUCTIONS
A. General
NOTE:
These instructions are applicable to temperate and tropical climates.
The
packaging is satisfactory for storage and transit purposes.
B. Packaging
Procedure
1. Put the Compass unit in a transparent polythene bag together with the
corrector Key (220) and electrical lead assembly (260).
Corrector
Key
Here
Information Label
Here
Heat Seal
Electrical Lead
Assembly
HERE
Standby
Compass
HERE
Transparent
Polythene
Bag
1. Heat-seal the bag and remove as much air as possible during the procedure.
2. Put the polythene bag in an ATA 300 category 2 foam-lined container. Add
packing material if necessary.
3. Close the container lid and seal with waterproof adhesive tape.
4. Put a label on the container with the information shown below:
Name, code and serial number of the unit.
Modification
state.
Date of last overhaul.
Batch
Number.
Shelf
Life.
PAGE 15001
APR 10/03
34-25-21
The document reference is online, please check the correspondence between the online documentation and the printed version.
