Sirona SIM MODULAR Operating Instructions Manual Download Page 58

Page: 58 / 218

65 64 020 D3650

D3650

201.01.02

02 04.2016

4 Operation

Sirona Dental Systems GmbH

4.5 Dentist element

Operating Instructions Simulation Unit SIM MODULAR

Swivel arm on CS dentist element

Spring elements in the dentist element pull the whip arm back into its

original position, preventing instrument hoses from hanging down.
➢ Remove the required instrument from its holder and pull it toward you.



The swivel arm is pulled forward along the instrument hose. On
the EasyPad, the speed or intensity of the respective instrument

is shown on the display; with the EasyTouch, the instrument

dialog appears on the touchscreen. The instrument can be

activated via the foot control.

The positions of the instruments on the holder can be optimized by

moving the guide rollers A on the whip arms.

Holder on the CS dentist element

Dentist element with swivel arms, penetration of fluids

NOTICE

Fluids can enter the dentist element through the openings in the swivel

arm.
This can damage the electronics in the dentist element.
➢ Do not place any liquids on the CS dentist element.

Summary of Contents for SIM MODULAR



























































































































































































































Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands

Sirona SIM MODULAR, Operating Instructions Manual

Search results

Summary of Contents for SIM MODULAR

Reviews:

Related manuals for SIM MODULAR

Brands by name

Popular brands