59 62 134 D 3407
D 3407
.
208.01.10
.
02 07.2009
23
Sirona Dental Systems GmbH
3
Operation
Operator’s Manual SIDEXIS XG
General
båÖäáëÜ
In addition to the image type, reason or notes, date and time of creation, the
name of the workstation that has produced the order is also displayed. This
simplifies possible queries. The buttons for selecting the image type and tooth
are unavailable here – they only indicate the desired image type.
After the dialog box is confirmed, the marked order is removed from the list of
orders. With intraoral X-rays, it is then possible to automatically switch to
readiness for exposure and to take the exposure.
Video exposures are started in the usual way by removing the camera from
its holder. To make the system ready for panoramic and Ceph X-rays,
proceed as usual.
Orders which are not processed are considered obsolete after some time and
automatically removed from the list.
The data entered on producing the order are taken over as far as possible in
its execution and used as a basis for the image description of new exposures.
3.1.8
Changing the program
Explanation
If desired, the service engineer who installs and configures the system can
configure an automatic program switchover. This can be used e.g. for quickly
switching from SIDEXIS to a practice management program or any other
software installed on the same PC.
CAUTION
An order is also removed from the list of orders if no exposure is taken after
the dialog box has been confirmed.
