Sirona Orthophos XG Plus DS/Ceph Operating Instructions Manual Download Page 48

Page: 48 / 128

7 Program group sinus views

Sirona Dental Systems GmbH

7.4 S4 Maxillary sinuses with two views in one image (linear slice orientation)

Operating Instructions ORTHOPHOS XG

Plus

DS/Ceph

59 87 594 D 3352

D 3352.201.01.18.02

7.4

S4 Maxillary sinuses with two views in one image (linear slice
orientation)

S4 Maxillary sinuses with two views in one
image (linear slice orientation)

(to allow for a certain depth localization).

•

Blue

bite block or contact segment.

•

Fit temporomandibular joint supports "

" and "

without ear holders, but with contact pads

•

Head inclination using the FH.
The line displayed on the touchscreen head icon in-
dicates the reflection line of the light localizer.

Do not release the exposure release button until the
message “R button, confirm exposure data” appears
in the comment line.

(Radiation is released automatically twice).

NOTE

For devices until October 2006:
Please observe the orientation (right/left) of the temporo-
mandibular joint supports specified on page 28.

CEPH

PAN

1260

68kV

8mA

14,1

Ready for exposure

Summary of Contents for Orthophos XG Plus DS/Ceph

































































































































Search results

Summary of Contents for Orthophos XG Plus DS/Ceph

Reviews:

Related manuals for Orthophos XG Plus DS/Ceph

Brands by name

Popular brands

Sirona Orthophos XG Plus DS/Ceph, Operating Instructions Manual

Search results

Summary of Contents for Orthophos XG Plus DS/Ceph

Reviews:

Related manuals for Orthophos XG Plus DS/Ceph

Brands by name

Popular brands