63 98 536 D 3439
70
D 3439
.
201.06.10
.
02 10.2017
8 Technical description
Dentsply Sirona
8.1 System requirements
Operating Instructions CEREC MC XL Premium Package
8
Technical description
8.1
System requirements
The CEREC SW / CEREC Premium SW / CEREC Premium CAM SW
software must only be installed on CEREC acquisition units or on the 64-
bit inLab PC (optional). For units up to serial number 304000, the
software status must either be CEREC SW 4.2.0 and higher or inLab SW
4.2.0 and higher. Units over serial number 304001 are only compatible
with software versions after CEREC SW 4.3 and higher or inLab SW 4.2.5
and higher.
For all software generations 4.x and higher, CEREC AC Bluecam PC
hardware version must be LN or higher (Windows 7, 64 bit). No hardware
limitations for CEREC AC / AF / AI with Omnicam.
8.2
Grinding and milling unit
8.2.1
General technical description
Grinding instruments
Milling instruments
● Digital feed control with force monitoring for extremely sensitive
processing
● Process-controlled tool drives
● Processing repeatability:
+/- 25 μm
● Step Bur 12 S
● Step Bur 12
● Cylinder Bur 12 EF
● Step Bur 20
● Cyl. Pointed Bur 12 S
● Cylinder Pointed Bur 12 EF
● Cyl. Pointed Bur 20
● Shaper 25 RZ (wet milling)
● Shaper 25 (dry milling)
● Finisher 10 (wet and dry milling)
Summary of Contents for CEREC MC XL Premium Package
Page 77: ......
