63 98 536 D 3439
D 3439
.
201.06.10
.
02 10.2017
29
Dentsply Sirona
5 Installation and startup
Operating Instructions CEREC MC XL Premium Package
5.4 Commissioning
båÖäáëÜ
5.4.7.6
Operating several milling and grinding units over one access point
For the operation of several MC XL units on one access point, you will
also require the following components:
● 1x LAN switch (e.g. Netgear ProSave 5 Port Gigabit Switch, Model
GS105)
● 1x LAN network cable (10m, order No.: 61 51 521).
1. Connect the LAN connection A of the MC XL units with the LAN
switch using the 10m LAN network cable provided.
2. Connect the access point with the LAN switch using the additional 10
m LAN network cable.
All MC XL units connected to the LAN switch can now be operated
via WLAN.
5.4.7.7
Connecting to the PC via the wireless interface (optional)
The CEREC acquisition unit has one of the following wireless modules
installed:
● Höft & Wessel HW 8614/F2
– Installation kit: 62 79 694
– Retrofit kit: 62 79 702
or
● CEREC Radio Device
– Installation kit: 65 42 521
– Retrofit kit: 65 43 073
IMPORTANT
Acquisition units and milling and grinding units can only work with one
wireless module system or the other. This means that any additional
acquisition or milling and grinding units that are acquired by existing
customers, which need to be connected wirelessly to existing systems,
will require the existing systems to be retrofitted in order to work with the
new CEREC Radio Device.
Summary of Contents for CEREC MC XL Premium Package
Page 77: ......
