9
PEBBLE LAYOUT
Figure 10
1.
Place the two centre ceramic pieces as shown. The angled edge should be in line with
the edge of the burner tray casting. On the 18” version there should be a gap of
approximately 50mm between the centre ceramics.
A
Figure 11
2.
Place two rows of 4 pebbles as shown above ensuring that the front pebbles overhang
the edge of the casting at the front and the rear pebbles are touching the rear wall of
the fireplace or convector box. Note: on the 16” version the right hand front pebble is a
narrow pebble different to the rest to allow it to be fitted at the side of the pilot (marked
`A’ above).
VI-06-09
