2.
Insert the axle (no. 12) into the frame (no. 2) as displayed.
Also affix the spacer rod.
3.
Stick the wheels (no. 13) onto the axle. Please ensure that the
wheels are aligned left and right, so that a space exists between
wheels and frame.
4.
Screw the wheels in tightly with the disks Ø10 (Nr. 20)
and the nuts (M10 / no. 21).
5.
Set the axle sleeve (no. 3) on both sides of the drum.
6.
Align the holes of the axle sleeves and the frame holes and affix
with the screws (M6 x 30 / no. 14) and the nuts (M6 / no. 15).
7.
Insert the crank handle (no. 8) into the drum axle. Align the
holes and affix the crank handle with the screw
(M8 x 40 / no. 16), the disk Ø8 (no. 17), the spring washer
Ø8 (no. 18) and the nut (M8 / no. 19).
Seite 3
