3
Delete connection:
3.3 Check and change the direction of rotation of the drive
Important: Please ensure the direction of rotation before starting to input the motor. We are
not liable for product damage caused by negligence during installation.
If the direction of rotation is reversed, you must repeat all the steps in section 3.2 under
Establish connection. Only in step 3 press the down button instead of the up button on the
remote control.
The direction of rotation is now changed.
4. Installation of the motor
Do not hit the motor with hard objects – not even to push it into the winding shaft.
This can cause damage to the drive and roller blind’s shaft.
Avoid installing the tubular motor in damp places or places where it comes into
contact with water
Installation
Place the tubular motor into the roller blind’s shaft.
The driver and adapter must be completely recessed into the winding shaft. The adapter must
be first pushed into the groove provided for this purpose on the crown of the motor head.
The drive head of the motor can be installed on the right or left side.
During installation, make sure that the drive head can be reached at any time after installation
in order to charge the drive via the external power supply.
1. Press the P2 button
once. The drive confirms
with a beep and an
up/down movement.
3. Press the P2 button
once. The drive confirms
with several beeps and an
up/down movement.
2. Press the stop button
once. The drive confirms
with a beep and an
up/down movement.