Sirius XM RAdio XSG2NA-X1, Owner'S Manual

Page: 8 / 45

8
2
Main Unit Display
The buttons located on the Infotainment Center front display are assigned the same reference here below.
Main unit buttons
1 PWR (Power On/Off) or MUTE 6 PIP (Picture in Picture)
2 Mode (Main Menu) 7 Navigation
3 DIM 8 Eject
4 Volume Down 9 Bluetooth Microphone
5 Volume Up 10 IR Receiver
POWER
1. Turn on the ignition to power up the Infotainment Center. The buttons on the front of the unit light
up. When the Infotainment Center is started up, it will immediately go to the last mode (memory on
playback) before it was turned off.
2. In order to put the unit in standby mode, please press the Power button (PWR) for more than 2
seconds. During standby, the display will show your vehicle graphic or be off. Your preference can be
set in the Settings menu (See page 10). Press the Power button again to start up again.
3. In order to turn the unit off completely remove ignition key and/or ensure any auxiliary battery power
to the system is turned off.
4. Quickly pressing the Power button will mute the audio on your system. Press again or a volume
button to resume audio.
MODE
1. Touch the Mode button to go to the Main Menu.
2. When in the Main Menu, use the touch screen to select the desired functionality.
3. You can also access the Main Menu from any screen by touching the function icon in the top left of
the current screen.
NOTE: When viewing video in full screen please touch the screen once to bring up the screen header
which will display the function icon. Touch the icon to return to the Main Menu.
DIM
1. Press to manually adjust the brightness of the LCD.
-/+ VOLUME CONTROL
1. The volume level can be adjusted on the front of the Infotainment Center display by using the volume
up and volume down buttons or by the steering wheel control buttons (optional).
2. The volume level can be muted completely by briefly pressing the PWR button on the front of the
Infotainment Center. The MUTE logo will appear the display.
6 1 2 3 4 7 8
9
1
0
5