Sirius XM RAdio Universal Boombox, Installation And User Manual

Page: 22 / 40

22
Subscribing to the Sirius or XM Service
If you have not yet subscribed your Radio to the Sirius or XM satellite radio
service, you’ll need to subscribe before you can listen to SiriusXM programming
on your Radio. To subscribe, refer to your Radio’s User Guide, or do the following:
1 . Be sure that your Radio is correctly installed as described in this guide, is
in the Universal Boombox, and that the antenna is oriented to receive the
satellite signal.
2 .
Press the Power/Volume knob to turn on the Universal Boombox. If the
Radio does not turn on at the same time, turn the Radio on.
3 . After the start up sequence, the Radio may update the channel line-up. Wait
until the channel updates have completed before pressing any buttons.
4 . Once the channels have been updated, the Radio should tune to channel
184 (Sirius) or channel 1 (XM). You will not be able to listen to other
channels until you activate your subscription.
5 . Use the Radio’s channel up/down buttons to tune to channel 0 to display
the Radio’s unique Sirius ID (SID) or Radio ID number. You can also tune to
channel 0 by using the Remote Control: Press the Select button, then the 0
(zero) button, and then press the Select button again. The SID or Radio ID
are also available on the Radio’s packaging, and may also be accessed by
pressing the MENU button and selecting Sirius ID or Radio ID. Write the SID
or Radio ID down in the space provided near the end of this guide.
6 . Have your credit card handy and visit https://activate .siriuscanada .ca and
follow the prompts to activate your subscription. You can also call SiriusXM
toll-free at:
1-888-539-SIRIUS (1-888-539-7474).
7 . When you have successfully subscribed to the Sirius or XM service, and the
Radio has been updated with your subscription information, an alert will be
displayed. To continue, press any button.
You are now ready to begin enjoying satellite radio, and can tune to other channels.