Sirius XM RAdio Outdoor Home Antenna Kit for Satellite Radio, Installation Manual

Page: 7 / 40

7
Safety and Care Information
IMPORTANT! Always read and understand all the instructions to avoid injury to
yourself and/or damage to your device. Sirius XM Radio Inc. disclaims all
responsibility for damage from data loss due to breakdown, repair, or other
causes.
• Review this installation manual before beginning the installation process.
Installation of the antenna and splitter requires experience in mechanical
and electrical procedures, and may involve using a ladder to reach the
soffit or roof of the home or building. A phillips-type screwdriver and a
3/8 in. wrench is needed for installation, and, depending upon the type of
installation, a power drill with a 3/32 in. drill bit may also be required. If
you are not comfortable or experienced with the installation procedures,
SiriusXM recommends that you have a professional install the kit and
wiring for you.
• Be sure not to cut, damage, or puncture the external jacket of the antenna
cables during the installation procedure. Damage to the antenna cable
can cause the SiriusXM signal to be degraded or unavailable, and can also
cause water to intrude into the antenna cable causing the cable to fail.
• Do not expose to chemicals such as benzene and thinners. Do not use
liquid or aerosol cleaners. Clean with a soft damp cloth only.
• Do not expose to fire, flame, or other heat sources.
• Do not try to disassemble and/or repair device yourself.
• Do not drop your device or subject it to severe impact.
• Do not place heavy objects on device.
• Do not subject device to excessive pressure.