21
To Connect the Home Dock to Your Stereo System
The Home Dock can be connected to your stereo system through the
Aux
In
or
Line In
connection of your stereo system, using the provided Stereo
Audio Cable .
1.
1.
Take the provided Stereo Audio Cable and connect the single 1/8” (3 .5
mm) connector to the
green
AUDIO
connector at the rear of the Home
Dock .
2.
2.
Connect the white left and red right Stereo Audio Cable connectors (“L”
and “R” are also on each respective tip) to any available input other than
PHONO on your stereo system . (If your stereo’s inputs are marked red
and black, simply connect the white plug to the black input .)
3.
3.
Turn the stereo system On, and make sure you select the correct input
on your stereo system for the
Aux In
or
Line In
connection .
4.
4.
If you have connected everything correctly, and you are receiving
signal, you should hear the SiriusXM audio .
5.
5.
The audio level of your Radio can also be adjusted, if necessary . Refer
to your Radio’s User Guide (go to
www .siriusxm .com/guides
) for
instructions on how to adjust the audio level . The installation is complete .
Home Installation
AUDIO
ANT
PWR
